Vehicles should be within the scope of FAG Bearings w ww.skf-nsk.org/ the rated load working, if serious overload will directly lead to bearing overload, bearing causes early failure, is more serious is that will cause the vehicle failure and personal safety accident;
Ban bearing a hit from the abnormal load;
Check the use state of bearing, observe bearing parts whether there are abnormal noise and local temperature rise sharply phenomenon;
According to the requirements on a regular basis, quantitative filling lubricating oil or grease;
According to the vehicle usage, at least once every six months to completely replace the lubricating oil, and the bearing are carefully check;
Bearing maintenance state inspection: the removal of the bearing with kerosene or clean gasoline, observe carefully if there is a sliding or bearing inner and outer cylinder creep phenomenon, inner and outer race of bearing surface spalling, pitting, rolling element and cage for wear and deformation, etc., according to the comprehensive situation of bearing inspection, to determine whether a bearing can continue to use.
Joint bearing is widely used in engineering hydraulic oil cylinder, forging machine tools, engineering machinery, automation equipment, automobile shock absorber, hydraulic machinery and other industries. Introduction of joint bearing and classification of FAG Bearings w ww.skf-nsk.org/ joint bearing is a spherical plain bearing, basic is by a spherical sliding sphere of inner and outer contact surface.
According to its structure and type of different, can bear radial load and axial load, or the role of the radial, axial and joint load. Because of joint bearing spherical sliding contact area is large, slope Angle is large, but also because most joint bearing adopted special processing methods, such as surface phosphating, galvanized, chrome plating, or outside sliding surface lining, padded, spraying, etc.
Therefore have bigger load capacity and impact resistance, and corrosion resistance, wear resistance, the heart, good lubrication and self-lubricating no lubrication characteristics of sewage pollution also can work normally even install dislocation. As a result, the motion of the joint bearing is widely used in low speed movement, tilted movement and rotation motion.